Home > Products > Police Vehicle Siren - IW1

Police Vehicle Siren - IW1

Item No.

FEATURE

Micro-chip control and steady frequency
Our quality sirens are loud enough to be heard from a considerable distance. For this reason, our sirens are a great choice for law enforcement and first responders alike.
It is important for the first responder community to have the best police siren sounds available.

Just as important, law enforcement officers, firefighters, and EMS workers need to know that their sirens are going to run every time they turn them on.
The 911 Signal model IW1 Siren is a ECO Configuration called the IMPACT siren series.
The siren includes an Amplifier / Relay Unit (IWP) and a microphone (IWM).

Caution:
The IW 1 Amplifier/Relay Unit housing is NOT waterproof. It must be mounted in a location which is sheltered from falling rain, snow, standing water, etc.
Also, it must be installed in an adequately ventilated area. Never install near heater ducts. Do not mount the IW1 Amplifier/Relay Unit under the vehicle’s hood.

VOLTAGE DC 12V
Power: 100W
Output: 2 output group Each MAX 5A
Impedance: 8Ω
Frequency range: 300-1600Hz
Tone :
091001:Yelp,Air Horn,Manual,Wail
091002:Hi/Low POL,Hi/Low SPO,Yelp,Yelp 249
091006:Police,Ambulance,Fire dept,Magistrate
091007:AIRHORN,WAIL,HL-SPO,UMH
091008:HL-GEN,HL-POL,UMH,ASA
Certificate: E24 ECE R10 041342
Dimensions: 7.2 "Long x 4.5" Wide x 2.0"High

Emergency Sirens, Ambulance Siren, Police Siren Operating Temperature Range: -20°C to + 60°C. Harmonic Distortion: less than 10% from 5 to 100watts Standby Current: less than 0.1 amps Operating Current: 10 amperes(nominal) Provides an electronic siren and light control system Provides four kinds of siren sounds Offers a total of 10 A load output for the light system High power and hi-fi tones With light control function